From the "Mobile Suit Gundam Iron Blood Orphans" series, Gundam Vidar, the second bulletin of the full mechanics brand, appeared at the end of 2016. The inner frame is reproduced, and the exterior is also drawn and raised for detail for 1/100 scale. This time, this "1/100 Full Mechanics Gundam Vidal" is produced by Takeshi Hitoshi! Replacing the pipe of Gundam · Frame with Spring parts, I am putting my hand into details.
▲ The front of the example. In order to complement the material of "full mechanics" which made both movable and mechanical detail compatible, we are replacing pipes with springs and upgrading each part.
▲ Back of the example. The backpack and the binders on both sides of the waist realize a form with speed. Spring parts of Fukuraghagi and vernier painted with metallic are also points.
▲ Sample from the side. It is an angle that understands the unique shape of Gundam Vidar.
Part II
head
Basically the kit remains. Tsuno is sharp. At that time it is hard to cut because it is intricate and scraped into 3 parts and re-adhered after painting. Besides that, the jaw is also sharp.
body
I wanted to make the body a little longer, so cut the part (D - 18) and extend it 2 mm. We changed pipe, etc. to commercial spring parts (2 mm diameter) and added. The cylinder of the shoulder is made of pipes. We make the connection to be neodymium magnet so as to follow movable.
▲ In the process of making. In addition to extending the torso, the shoulder pipe was rebuilt to follow the movements.
▲ Body from the front. Part of the pipes painted in black and silver, and parts replaced by springs on the back have synergistic effects and are enhancing the mechanical atmosphere with the AHUB reactor.
▲ Back of the example. I am removing the backpack so that you can better understand the spring parts.
I think that we want to close with the plaque because the back armor of the waist is dented. Because the poly cap of the side burst saber parts (A-23) is exposed, it is cut a little and is closed with a plastic plate.
▲ Plastic board is stuck on the back of the front armor.
▲ Lower part. It is also paying attention to the one point of the round silver at the tip of the waist part.
Part III
arm
Because the frame of the forearm is pinched, we are working on the back side.Cutting at the position of the image can make the backward sag.
▲ After-sash processing of the arm. I cut the exterior (photo right) into a triangle.
The pipe on the forearm of the frame is also changed to a spring of 2.5 mm.
▲ Like the body, arm parts replaced by spring parts.
leg
Since the exterior of the snake is pinched, we changed the division method so that it can be installed after painting. The front and rear Vernier base also looked like a detail. We changed the pipe of Fukuroagi to 2.5 mm spring.
▲ Looking at the state of making legs.
▲ Fukurakhagi that was upgraded. Vernier's base is also noteworthy.
weapon
We created a rifle's trigger guard and added a trigger. This also makes handles. I changed the scope lens to a commercially available clear part.
▲ Trigger guard is not connected near the grip, so work to connect. I also made a trigger, and the hands also fit their shapes.
▲ Use the commercially available clear parts for the scope of the rifle.
▲ Because the movable part is contained in the wrist of the kit, it is possible to protrude the saber forward.
Part IV
I painted German gray on the ground and started up with each color. However, at that time gray is emphasized so that it does not become quad, so it may not understand much in the image ... .... Also, I tried to produce a special machine feeling using pipes, cylinders, indirectly silver and gold. Decal used a commercial caution decal.
Completion
▲ I am using gray as the ground, but it is adjusted not to get clogged. Beginning at the tip of the shoulder, detail-up parts are also placed at points.
▽ Hizi joints with a metallic atmosphere.
▲ The back of the knee, silver and black, and the hip joint gold are useful as viewing point points.
COLORING DATA
- Blue ... 65th · Indie Blue + 50th · Clear Blue +47 · Clear Red + 1st · White + 2 · Black
- Gray ... 40 number · German gray + 1 number white
- Red ... 79 · Shine Red
- Frame ... No. 29 · warship color + 1 number · white
- Rifle ... No. 29 · warship color + 1 number · white +50 number · clear blue
- Vernier and others ... Gaia color No. 125 · Star Bright Iron
- Pipe etc ... Gaia color No. 10 · Bright gold
DATA
1/100 Full Mechanical Gundam Vidar
- Now on sale
- Price: 3,240 yen (tax included)
- Publisher: Bandai Hobby Division