ปรับแต่งหุ่น SRG-S Shrouga · Shin

แปลไม่ไหว.. เยอะ ขอลงทั้งดุ้นไปเลยนะ ^_^

The next example of electric shock sproutbo is "SRG-S Shrouga Shin" released in December.

Although it is a fuselage that has taken up several times even in electric shock sprouts, it will finally begin to produce an example.

This plastic model which reproduces fine color classification and clear parts etc. This plastic model, how to process on processing ... Let's check the points.

Editorial department:

It is Shrouga · Sing as "Balmeca", which is an outgoing item called "Balmeca", but while listening to the volume of the wing, it is an item with a lot of attention, such as detailed color coding of each part.

Tominaga:

It is a thing full of glad charm as a fan, such as "Mr. Osamu Masami" face, "Integral Discoverbar Special Expression Parts" with Perth that Mr. sticked to, and Hirate Parts.

However, it actually feels like it is not easy to add another hand to this. Let's take a look at each part for now.

Tominaga:

The face part is pinched in the head. The horn and forehead part are shaped to be inserted later.

Tominaga:

I think that the face cuts the T part of the image and makes it backward.

Tominaga:

Since the eyes meet at the center of the waist, the body part handles here.

Tominaga:

Also, because the eyes have been running with the neck also aligned to the center, we will correspond.

Editorial department:

Fuselage is color-coded fine, what kind of parts is it?

Tominaga:

This is the parts of the fuselage.

It seems that it seems to be a problem if the joints are coming out with the previous part and the shoulder part sandwiching the poly cap, and the other parts after painting and assembling with crackling.

Tominaga:

Next is a shoulder part. Black parts have hollow holes on the inside, so fill them here.

Tominaga:

The gold protruding part cuts the T part and makes it backward.

Tominaga:

It is the arm part. Although the upper arm does not have a joint eye, since the parts of the ultramarine part (red circle part) that needs to be removed at the time of deformation are difficult to remove a little, it is difficult to remove the golden parts (also in the red part) I think I will bond them.

Tominaga:

Since the eyes of the forearm part are aligned with each part, we will process each part.

Editorial department:

This arm is mobile and the elbow firmly bends.

Tominaga:

I agree. Since the shoulder is also a drawer type, the degree of freedom of posing is high.

Tominaga:

It seems to be okay as it is as it is divided so that the waist does not come out.

Tominaga:

This time it is the leg part. First off from the thigh.

Since the moving part is pinched by the armor here, we scrape off the head of the thick peach nail and make it backward.

Editorial department:

Will not it slip off if it is it?

Tominaga:

I think that I can adjust the astringent well and make it difficult to get out.

Tominaga:

It is the part around the snake at the bottom of the leg. I do not want to keep the red clear parts part this way ... .... Let's detach the protruding part once, paste metallic tape etc on the back and re-adhere.

After that, I think that I want to fill in the protruding part of the knee (the right end of the image) because there is a meat puncture hole on the back side.

Tominaga:

The end of the leg parts is the ankle. Although it is also pinched here, if you set the back of the kakato (the image on the upper right), you will feel uneasy in strength, so I think that we will respond by painting masking.

Tominaga:

For the forefoot part, cut the T part of the part on the left of the image and make it backward.

Editorial department:

The end is the wing part. There are parts that can be moved in the clause, but it seems to be strange, but ....

Tominaga:

It is a part where it is likely to decompose the right image as possible with posterior skeins. I think that the wing body takes care of the moving part and it will become a flow which turns the matching eye in order from inside (pinching).

Tominaga:

Since there is still anxiety about strength in this area, I think that ((painting) will become masking).

Posterior to the head

If you cut the protrusion that is T-shaped in the face part and the convex part on the back side of the ho ho side of the helmet like an image, you can do the rear sash after painting. Since there is a moving part at the base, it is recommended to fix it by adhesion in the end.

Body backwards

Prior to the ease of processing, the waist processed the frame like an image and made it fake behind.

Buried under the lumbar area

The upper part of the waist is buried with a polyester putty (hereinafter referred to as polypate) and sharpened by scraping the lower border. Front armor which becomes the nose of the form of the black bird type also buries the backside meat puncture with polypate. Base connecting hole Housing that also serves as cover hiding is a 0.5 mm plate to close the gap.

Shoulder armor posteriori

Shoulder armor is making a posterior fake like the image against the part where the outside gold part enters. To the bearing of the gold part, the number plate of the runner is glued, and the rattling at the time of installation is suppressed.

Shoulder armor burning buried

Also shoulder armor exterior decoration also fills outstanding parts with polypate.

Thigh processing

The pinching type hip joint block cuts the protrusion of the lower part and makes the back side fuse, and fills the flesh of the movable part with the polypate.

Since the holding force of the shaft decreases by the above-mentioned processing, the retention force is increased by closing the gap of receiving with a plastic plate, polishing paste scraps, black instantaneous adhesive. The interfering part of the assembling associated with processing was also cut.

Snake back posture

I cut off the convex part from the built-in clear parts and made it into the rear female. As a mistake mistake and loss prevention, numbers are assigned such as upper right (1), lower right (2), upper left (3), lower left (4) and so on for easy understanding. Installation is done with metallic tape and double sided tape.

Toe processing

The nail of the toe fills out the meat with polypothat, and the gray parts cut the attachment part and rear female. The black part is filled with a black moment adhesive with a meat puncture. The red parts on the instep of the foot were difficult to follow, so it is incorporated as it is on the ankle just like the nail of the kakato. Attach the gray parts with the protrusion in this red part.

After wing slug

Parts of the purple that grows on the top are processed like images to make it fake behind.

The base of the stabilizer that extends from the bottom is made by processing the red parts like an image and making the rear fuse. Since this part is inconspicuous in its joint eye, you can install it after pinching the stabilizer.

Wing decoration part processing

Because the decorative part with the movable fin is pinched, here we dealt with molded the joint of the base part.

Wing processing

The wing was sharpened by scraping with a 1 mm plate attached to the top of the 1st, 2nd, 3rd block counted from the tip. Also, we change the angle to express the difference for each block.

All processing is completed with the above. After this, surface treatment is done, painting is done and it is completion.

head

A helmet imitating the head of the bird, a mouth visible from the guard covering the nose and chin, and a part where Mr. Zhang's design and elements understood at a glance were included. By the movable point on the head side and the ball joint of the neck, expressions expressing the jaw and face facing upward are prepared readily. Although the face part is doing posterior squirrel processing, when temporary incorporation was done after the middle photo, since it turned out that it was not good, cut all the connection pins with the back head part and adhere it with a styrene resin adhesive We changed to assembly. Also, with regard to the purple or pink part of the shoulder armor tip, back, thighs, calves, including the ear side, masking is done after painting this first, and painting each body color is fine To go.

body

The joints are conspicuous only in the neck and abdomen, others are structured so that they can be incorporated after painting. Because the clear parts of the shoulder blade part are mobile type, it does not hinder the movement of the shoulder armor. Movement of the chest and abdomen is also wide enough to warp the body and bend. Considering the ease of surface treatment of the abdomen, we performed posterior sash processing on exterior parts and plumes.

Arm

The joint structure around the shoulder is a poly part protruding on the base side of the shoulder joint, a double hinge of the shoulder joint block is used, and it has a wide range of motion so that both hand holds are determined. Shoulder armor, base of shoulder armor, forearm, where joints appear, shoulder armor sandwiching the base of the base sandwiching the block of gold, and rear female. The gold block also bonds runner tags cut into bearings, suppressing rattling when attached. Shoulder armor exterior is filled with polyester putty (hereinafter referred to as "polypate") for the conspicuous part's meat puncture. Since the ring parts of the Hizian joints are not so thick, there is a risk of splitting when inserting them with suff or paint. Therefore, it is better to avoid coating paint on the shaft as much as possible, or adjust the fitting while dropping the coating film with canna. Most of the other parts can be incorporated after painting. It is a wrist part made of PVC, but if you delete the parting line with 600 number paper and leave that trace with 1000 paper, it is no problem. Painting was done with buoy color, and the red at the base of each finger was difficult to mask, so we did not melt the base, we coped with the lacquer type paint brush painted to some extent with brush painting.

waist

The waist is filled with polypate with the border of the border on the outer circumference of the armor, and the outer side is thinly scraped. The part which hides the hole for mounting the flying base is blocking the meat puncture with a plastic plate. In the form of a black bird nose of the front armor which is nose filling is filled with polypate.

leg

Legs that combine beauty and sharpness that will become slender as you go down. Like the shoulder joint, the hip joint has a double hinge system and lateral roll structure, combined with a double joint structure knee joint, an ankle joint that is used in conjunction with two connecting axis movements, this also brings a wide range of posing . Because the hip joint is a structure to be caught in the thigh, we cut the lower part and made the rear female. In accordance with this, the gap of the part where the shaft enters is also clogged with polishing paste scraps, plaques, black instantaneous adhesive to increase the degree of adhesion, making it difficult to remove when mounted. Mechanical cutouts that are noticeable when moved are filled with polypate.

Because of the deformation of the knee joint, the side of the thigh is disengaged, so masking can be done easily. Because the bonding area of ​​the snake, which has conspicuous joints, is small, it is better to adhere it with styrene resin adhesive as much as possible and to erase the joint eye. Clear parts of the side cut the convex part with the etching saw, and cut off the inconspicuous border, and assembled while adjusting the fitting. The ankle carries behind the gray parts into which the nails come in and the nail fills the meat puncture with polypate. In order to maintain the strength of the nail of the kakato, the red of the instep of the feet was incorporated as it is due to the convenience of erasing the eyes, and the painting partition corresponded by masking. I thought that the protuberance of the knee initially would fill up the meat puncture, but as it was because the one who did not fill in was the correct answer and there was a fear that interference of the knee joint could be caused, it was left as it was.

wing

Although it is a wing which is an element that adds power to the body, it is actually the most difficult point in this kit. It is safe to be able to do the skeleton even if there is no machining, it is possible to incorporate it later, the upper blade unit requiring machining, the stabilizer only, the body with many movements is touched even in the text, It will definitely lose holding power when you flip up. Although it is touched also in the text, in the case of glossy finish, if a painting mistake in the part which will be hidden by movement is found, it is forced to make an overall correction, so we dare to mold it and say, "Massive surplus of the main body Slit for releasing ") is one measure. In other cases, I think whether it is good to just complete with semi-gross black or matte black, including the main body.

A 1 mm plate is pasted and sharpened into the top of the second and third blocks from the tip and tip, and sharpening is done. The base part where the decorative part enters is molded into the joint and made it possible to incorporate it after painting. If this decorative part also paints the red part, since the fitting of the clear part becomes tight, it is good to cut off the border with a cannon and change it to attachment with a metallic tape and a double-sided tape.

weapon

The intellectual dis - caliber that is also included in the regular version has been reproduced with sufficient size, and the length of the handle has become moderate length enough to hold both hands. Premium Edition adds special expressive parts with parsing and dis - caliber, and when combined with special expressive parts brings further strength to the traditional stance. Everything other than doing streaky carving correction for smearing and coat separately remains as a kit. The red of the blade aimed at differentiation from the main body by making the ground as gold.

Blackbird morphology

It is a part composed of a body whose shape is remarkably different from the form of the black god shape, with the main body wing, rear armor, front armor, shoulder armor, forearm, knee underneath, by attaching extension parts to the ankle, It will be completed. There is a poly part of 3 mm in diameter at the lower part of the aircraft, and it inserts 3 millimeter axis for the base here and displays it. The red part which exists in the left and right block cuts the convex part and makes the rear female, and conspicuous meat removal here, the shoulder armor, the frame of the frame where the forearm is inserted is buried with polypothat.

■ I arrive, to that gate
and the barrage of paint mistakes in addition to the degree of difficulty far beyond the expectations of here, but I realized the game main similar Tezuyo is, beyond the minute one by one hurdle The sense of achievement at the time is also great. Please also try yourself with your own ideas and aim for completion. Because Premium Editon will end as soon as stocks at manufacturers and directly managed stores run out, purchase as soon as possible!

Coloring data

• Body black: GX No. 2 · WINO BLACK → GX 100 · SUPER CLEAR III
• Wrist black: No. 2 · Black (buoy color)
• Body Gold: WINO BLACK -> G122 - Star Bright Gold
• Body Red: Wynold Black → G121 · Star Bright Silver → G41 No. · Clear Red + G42 · Clear Orange Small Amount + Super Clear III Small Volume
• Wrist Red: 158 · Super Silver + Clear Red
• Body silver: Wynold Black → Starbright Silver + G37 number · Pure color violet small amount
• Body Gray: No. 72 · Medium Blue → XC No. 5 · Sapphire Blue
• Jewelry part: GX No. 1 · Cool White → GX No. 206 · GX Metal Purple
• Eye: Cool White → GX No. 212 · GX Metal Peach
• Weapon Red: Wino Black → Star Bright Gold → Clear Red + Clear Orange Small Amount + Super Clear III Small Amount
• Weapons money: Wynold Black → G10 number · Bright gold
• Weapon Green: Wynold Black → Star Bright Silver → 138 · Clear Green
• Part of the part where the clear parts will enter: WINO BLACK → Star Bright Silver

※ G is Gaia color. All other things not specifically mentioned are GSI Creos 'Mr. Color', 'Mr. Color GX', 'Mr. Metallic Color GX', 'Mr. Crystal Color'

DATA

Shrouga Singh

• Non scale plastic model
• Overall height: about 181 mm
• Price: 9,200 yen (excluding tax)
• Now on sale
• Publisher: Kotobukiya

※ Flying base is not included.

Shrouga · Shin Premium Edition

• Non scale plastic model
• Overall height: about 181 mm
• Price: 10,000 yen (excluding tax)
• Now on sale
• Publisher: Kotobukiya

* Integral · Dis Caliber special expression parts included

※ disk caliber comes
※ Flying base R accessories

※ Kotobukiya shop limited item