▲ Bug that first appeared in "Mobile Suit Gundam THE ORIGIN Ⅳ". Please pay attention to beautiful painting by color modulation!
It appeared in the latest work of "Mobile Suit Gundam THE ORIGIN" and is also a MS-04 bug that draws attention from being Lumber Lal's aircraft. "HG 1/144 MS-04 Bug (Lamber-Lal machine)" which was released shortly is super good kit which realized massive and dense styling in addition to the high detail exterior common to the HG Origin series .
This time, we will produce such "HG 1/144 MS - 04 Bug (Lamber - Lal machine)" by Saeki Kouichi, which specializes in heavy - duty weathering finish. Compared to ordinary examples, the dirt is suppressed, but please pay attention not only to the beautiful painting full of three-dimensional feeling by color modulation which was applied to the whole body instead!
※Related article
HG 1/144 MS-04 Bug (Lamber and Lal machine)
▲ The front of the example. Although I have put a lot of effort on each part, please first look at its finish.
▲ Back of the example. Originally added to the high-detail kit, the information amount plus.
▲ Bust up. Can you see the effect of color modulation?
▲ kit structure front side. The proportion does not change very much, but the impression differs greatly due to the difference in the shade of blue.
Part 2
▲ This time we will explain about the work edition!
It appeared in the latest work of "Mobile Suit Gundam THE ORIGIN" and is also a MS-04 bug that draws attention from being Lumber Lal's aircraft. "HG 1/144 MS-04 Bug (Lamber-Lal machine)" which was released shortly is super good kit which realized massive and dense styling in addition to the high detail exterior common to the HG Origin series .
This time, we will produce such "HG 1/144 MS - 04 Bug (Lamber - Lal machine)" by Saeki Kouichi, which specializes in heavy - duty weathering finish. Compared to ordinary examples, the dirt is suppressed, but please pay attention not only to the beautiful painting full of three-dimensional feeling by color modulation which was applied to the whole body instead!
HG 1/144 MS-04 Bug (Lamber and Lal machine)
About the kit
The Zaku series of "Origin" has well reproduced the solid form, and this is the same as this one. I think that the frame is diverted from the existing kit, and the joint unit of the knee and ankle is new, so you can see how to put in a clue. In this time, I tried to tweak each part to further emphasize a powerful image.
Arm
I felt the arm part somewhat unreliable compared to the bottom part of the lower body, so cut the ball joint shaft of the shoulder and shift it downward 1 mm to make it as a shoulder shoulder so that the head can be seen nicely, . Raise the mounting position of the arm. That extent of the upper arm extended 1 millimeter, simultaneously increased 1 mm width.
We wrapped 0.5 mm plaque around the sleeves and made it thicker. This can be balanced with a slightly larger wrist. I put a commercial part on the cuff and made it a joint hiding. Heidi block is raised with 1 mm plaque.
Rattan style mold of the shoulder is somewhat too big, but it is something that is nothing and barren is to scrape this and make it your own (laugh). It is a bit cumbersome to turn off the joints, but let's pinch the folded sandpaper with tweezers and go along the way.
The connection parts with the shoulder block were made to be able to trim after scraping (part painted red in the middle). Both the hand and the hand of the wrist are correcting the expression of the thumb to the natural one.
▲ In addition to increasing the volume of the arm overall, in order to make it a shoulder, the axis with the shoulder has been lowered by 1 mm.
▲ The arms of the kit framework.
▲ It is also a feature of a bag Detail of shoulder rattling style. Let's finish Yasu beautifully on a steady road.
▲ If you cut off the part painted red in the upper left corner of the photo, shoulder armor will be able to play back.
head
It is unique that the mono gear runs gears in the kit. Open a hole in the mono eye shield, insert a clear pink runner and mold it into Tsuraichi, paste a Rape tape on the back, and glow behind. Although it is standard to cut the support thinly, this time I tried to treat it like a frame style by streak carving and painting. The blade antenna sharply sharped, and it adhered somewhat raised.
▲ Comparison with prime head. It is recommended because the work of mono eye is very effective. The pillar part is framed like stripe carving and painted separately.
body
Both chests tend to be unbalanced when their arms are moved, so let's assume that people of Pachi association bond themselves together. I opened the intake and pasted the molded plastic plate from the back. Scrap the fin and make it thin with a plaque.
Enclose the periphery of Fundoshi 1 mm plaque and enlarge enormously. Then, adjust the front skirt so it will hit and adjust. I shortened the power pipe by 2 frames, so that the waist was tightened and visible.
▲ breast up. The intake opens, and a placard with details put in from the back is pasted.
▲ Upper part up. Compared with the picture below, I think you can see that the Fundoshi part is getting bigger.
▲ Kits Framework Waist Up.
leg
We do not fill all of the knees of the knees, partly to make use of the details. I am glad that the joint block became new, and when I saw it from behind, I could not care about the joint eye. Add a little more mold as it is awesome. I cut off the interfering dowels (the part painted red in the middle), so that the S shape is decided. Heather armor is increasing 1 mm thick.
▲ leg. He knocks out volume up.
▲ Kit legs of the framework.
▲ Add details to the back of the knee. It became a jammed finish of information.
▲ As shown on the left of the picture, we cut off the part painted red, so that we can decide S shape.
Other
Carved out the whole mold and add some with reference to the setting picture. We cut out round places, we put on market parts in big places and bleion (1 mm acrylic grain) purchased in handicraft shops in small places. Weapons remain as a kit.
▲ Sharp the details of the whole body by replacing them with commercially available parts.
Part 3
▲ The last round will explain the painting!
It appeared in the latest work of "Mobile Suit Gundam THE ORIGIN" and is also a MS-04 bug that draws attention from being Lumber Lal's aircraft. "HG 1/144 MS-04 Bug (Lamber-Lal machine)" which was released shortly is super good kit which realized massive and dense styling in addition to the high detail exterior common to the HG Origin series .
This time, we will produce such "HG 1/144 MS - 04 Bug (Lamber - Lal machine)" by Saeki Kouichi, which specializes in heavy - duty weathering finish. Compared to ordinary examples, the dirt is suppressed, but please pay attention not only to the beautiful painting full of three-dimensional feeling by color modulation which was applied to the whole body instead!
HG 1/144 MS-04 Bug (Lamber and Lal machine)
Colouring
Because it tends to be monotonous in whole body blue color, we changed some color scheme and put the gradation gorgeously with color modulation. The line added by pushing is by painting. Marking uses the seal attached to the kit and the past campaign seal.
▲ Upper body up. Color modulation is effectively decided.
Color Recipe
Full body ... Titans blue (foundation) → MS light blue (body color) → body color + white (highlight)
Wrist · sole, etc. ... German gray (ground) → ground + white (highlight)
Joints ... Khaki
Weapon · school bag ... German gray (ground) → engine gray (body color) → body color + white (highlight)
Power pipe ... Dugram color · gray violet (Gaia Notes)
Vernier etc. ... G ice ice silver
"Mr. Color" especially those without representation of GSI Creos ※ " Mr. Color GX," "Gundam color"