▲ It is crazy box art so crazy. I definitely would like to paint with this image !!
Kit contents
▲ I tried out the contents from the box. While the simple configuration is Uri's RE / 100 series, it is quite a volume.
▲ It is a manual. Specification with luxury of black back.
▲ Flyer for RE / 100 Ribau with reservation accepted at premium Bandai! I definitely want to have two of them.
▲ It is A runner. The exterior of the leg is powerful.
▲ It is a B runner. It is a runner of the internal mechanism.
▲ It is a C runner. Make joints and so on.
▲ It is a D runner. The wings stand out.
▲ It is an E runner. Vernier and other runner that will become a different color.
▲ It is an F runner. This part seems to erase a little more than other parts.
▲ It is a G runner. It looks like parts like West.
▲ It is H runner. It is a multicolor molding runner such as armed and insignia.
▲ It is a poly cap. It is familiar on the RE / 100 series.
▲ It is seal & marking. Speaking of Bow, marking "Ryu Fei"!
Assembly start !!
Now that we have finished checking the contents, let's assemble it at once.
▲ Instructions At the beginning there is a rough assembly flow posted. I am happy about this kind of thing.
▲ It's first from the body. Let's build from the base of the neck.
▲ This is the connection to the shoulder. It is a design that makes the flow of the zeta system.
▲ We combined the two parts.
▲ At the time of deformation, the base of the neck sinks as shown in the picture, and the front and rear parts open.
▲ This is the central part of the fuselage at MS, parts that will become the nose when bow attacker.
▲ It can be folded for MS time.
▲ And thrusters and decorative parts. I am happy that it is all different parts.
▲ If you attach these, the fuselage is completed.
▲ From behind. Propellant tank has presence.
▲ I will move on to the head. The mono eye is reproduced with a foil seal.
▲ Scissors with exterior from left and right. The joints will come to the center, but it does not matter as it is a molded paragraph.
▲ Completion if you cover parts of Tosaka and head top. When moving a mono eye, remove the part at the top of the head and move the knob inside.
▲ The next is the arm. The picture is the base part of the shoulder.
▲ The inside of the shoulder exterior is filled with the engraved parts of the mold like this.
▲ I got a shoulder sandwiching the base parts from the front and back.
▲ Frame-like parts will enter the forearm. Notice also that there is a grenade · launcher properly!
▲ The exterior is covered and the wrist is attached, the arm is completed. This arm, many gimmicks ... ....
▲ It is possible to have a beam / saber stored in the inside of the arm in hand.
▲ The cover of the grenade · launcher can be opened and closed ... ....
▲ The parts of the base of the wrist rotate, you can hide the poly cap during deformation. A delicate design glows!
▲ Now, let's make the waist. This is the base part.
▲ The middle yellow part is the connection part with the abdomen, but because it can be tilted to the left and right, it can give dynamic movement more at the time of posing.
▲ I put around the front and rear armor. It is a part that is bought by Mr. Bau in a gentle atmosphere.
▲ This is the nose of Bau-Nutter, it is a part that becomes a connection with the upper body.
▲ If this is assembled, the waist is completed.
▲ Now, let's go to the leg. First off from the ankle.
▲ Kakato moves inward. It is a deformed MS unique.
Let's assemble Futomomo subsequently.
▲ And snap to dock. The color of the vernier part is splendid.
▲ By the way, at the time of bow / nutter, the ankle is stored inside the snake as shown in the picture.
▲ It is completion of the leg. Now the limbs are complete.
▲ It is a back pack. The black parts are matte molded colors are cool.
▲ I will install a wing here. Power!
A triple missile is attached to the wing. Removal is also possible.
▲ like this. Because it is for MS time, the missile is facing upward. When you come here ... ....
The main body is done!
▲ Well, it is elegant but elegant but cool!
▲ Come now, only to leave armed!
▲ Firstly from beam rifle. A seal is affixed to the lens part.
▲ The joints of the rifle are treated as a paragraph mold. Too hard to erase the wearer's collar, this is a high point!
▲ The last is a splendid color shield. If you can do so far ... ....
done!!
▲ Finally RE / 100 bow was completed. I attached the attached marking.
▲ Honey like a distinctive fighter is also cool without complaint!
▲ Bust up. The organic line's necklace is gracefully elegant.
▲ Character of "Ryu Fei" in the front armor. After all there is no such thing!
Bow / Attacker
▲ First unlock the fuselage and separate the upper body and lower body from each other.
▲ Continue to stretch the nose portion and sink the neck inside the fuselage. ※ For explanation, the arm is removed.
▲ Level the main wing horizontally and fold the connecting part with the abdomen.
▲ Assemble shield and beam rifle at the bottom ... ....
▲ Remove the wrist and put the arm in the shoulder armor.
▲ Once you folded your arms to the bottom of the fuselage, the Bow / Attacker is complete! Beautiful silhouette!
Bau · Nutter
▲ Pull up the wing-type waist side armor and store the ankle inside the snake.
▲ If you rotate the legs outward, Bow · Nutter is completed! By the way, because you can connect with the back and waist front armor back, you can fix the angle of the legs perfectly!
How was it? With this, we will finish the review of this new Gundam model. The introduced RE / 100 bow is not only excellent in the proportions of proportions, details, and deformation mechanisms, but also from the modeler's point of view, such as where the joint seam which surely arises is almost a paragraph mold. It is a good kit being done. Together with RE / 100 Ribaud where orders have begun in Premium Bandai, I'd like to have fun!
DATA
RE / 100 Bow
- 1/100 scale plastic kit
- Now on sale
- Price: 3,780 yen (tax included)
- Publisher: Bandai Hobby Division